Michael Campbell's blog about his model railways. Building model railway layouts in 009 (OO9) scale
Sunday, 10 May 2009
Sompting Show
I managed to get out to another show this weekend, at Sompting Village Hall. This is a small show, but the small hall was well stocked with layouts. Some were a bit busy for me, of the rather over-stocked N-gauge type, but they do entertain the public and my 2-year-old! I don't remember the names of the layouts and no show-guide, but some pictures of those that caught my eye are below, and included a superb 7mm scale tram (I've seen this layout before but the detail is fascinating), a 7mm scale NG industrial (compact and nicely done), and a Swiss HOm and HO layout (a bit too much Bemo but superb scenery). As a bonus, I happened to notice some microtrains couplers on a trade stall, they must be second-hand or old stock judging by the packaging, but I needed some and they were cheap as well as saving postage!
Saturday, 25 April 2009
SWING-ing in Bognor
No, I've not been out on the town ... but I did get a last minute oppotunity to go to the St Wilfreds Industrial and Narrow Gauge (SWING according to the organisers!) show in Bognor today, albeit with 2-year-old in tow so I didn't get decent pictures of every layout, but I published the better ones here:
I think this is a new show, and it could be said that the hall was a little crowded, it was a bit tricky to move around the layouts, and there wasn't much trade support. However there was a great selection of layouts - 12 in total, focusing on narrow gauge and industrial railways in a good range of scales - not a dud one amongst them. Most are rarely seen locally too, though 2 were from my local 009 group and I had seen 3 or 4 elsewhere, 2 of then at EXPO-NG which I think is a testament to the general qality of layouts. Well worth the trip!
Wednesday, 22 April 2009
Another new arrival!
OK, so it isn't anywhere as significant as the last post, but a small parcel arrived in the post today (along with various parcels of little pink dresses etc.) containing the Paul Windle Hunslet loco I ordered at EXPONG back in October (actually it arrived earlier than expected, Paul had suggested May). And what a super little loco it is, with a rather elegant outline. Here's a photo of it pulling it's first passenger train out of Awngate.
Paul suggests that some ballast would improve running, so I shall have to fit some lead, but it does seem to run smoothly. Also, like several of my loco's, a crew wouldn't go amis! However Paul has even fitted the microtrains couplers already, so it is literally "ready-to-run", just as well given my available modelling time at the moment!

Monday, 20 April 2009
A New Arrival!
Lucy Ann
19th April 2009
Weight 10lb and 15oz - that's almost 5kg!
Mother and Baby doing fine. Dad is well chuffed!
Sunday, 12 April 2009
Increasing My Magnetism
At the Haywards Heath show I picked up some magnets sold for uncoupling Greenwich couplers. These are of the "rare-earth" (neodymium-iron-boron, I believe) super-strong magnets, similar to those I bought a few months ago but bigger, this time about 5mm diameter by 2.5mm. The idea was to improve the uncoupling magnets on Awngate. As the Microtrains couplings need a magnetic field accross the track it was clear that the magnets would need to be used in pairs, so I set up a piece of track on the workbench and armed with lots of blue-tack and a couple of wagons, started experimenting with them in different positions.
Now these are STRONG magnets, if placed just under the track the wagons shot toward the magnets and up-ended on to their couplers, which stuck to the magnets! Yet spaced apart and well under the track they didn't seem strong enough, what is probably needed is a block of steel between a pair of magnets. Then I thought, well rather that replace the magnets I had already placed under the tracks, why not just increase their magnetism? So I put a pair of the new magnets onto each pair of cupboard-catch magnets, as shown in the photo below. Well, actually I only had enough to do 5 of the 8 magnets, but some worked OK anyway.
The result is surprisingly effective, the magnets are certaily strong enough now - even through the ballast, but not so strong to up-end the wagons! (they can roll toward a magnet if left very close). I wouldn't say all uncoupling problems have been solved - I still need to check all couplings are mounted correctly and well lubricated with graphite - but if things don't uncouple, it's not the fault of the magnets.
Thursday, 12 March 2009
More Photo's from the Exhibition
Mick Thornton, 009 Society and general narrow-gauge model railway roving reporter, has published some excellent pictures from the Sussex Downs Members' Day show last Saturday:
http://mickthornton.fotopic.net/c1665982_1.html
They include some very flattering photo's of Awngate, better than many of my efforts!
http://mickthornton.fotopic.net/p56862524.html
http://mickthornton.fotopic.net/c1665982_1.html
They include some very flattering photo's of Awngate, better than many of my efforts!
http://mickthornton.fotopic.net/p56862524.html
Saturday, 7 March 2009
Haywards Heath Show!
Well I got there in the end! After a few frantic days and a couple of late evenings getting everything ready, the layout up to a reasonable standard, the stock in good shape with the right couplings fitted, and the loco's serviced and tested, the day finally arived for Awngate's first public appearance!
The trestles worked well, and were tidied up with a drape as you can see below. The trains performed well, but the uncoupling was a bit hit-and-miss. I got some more magnets to try. Other than that the only problem was a point failure - the blade came loose, but I managed to get it back in place and super-glue it. Lots of people made nice comments, and there was a lot of interest in the fiddle yard! My friend Steve helped out with the operating, getting very engrossed in the shunting (see second picture) - thanks Steve.






The rest of the show was enjoyable too, you can see more photo's here:
Labels:
009,
Awngate,
exhibition,
Haywards Heath,
operation
Subscribe to:
Posts (Atom)
