Showing posts with label stock boxes. Show all posts
Showing posts with label stock boxes. Show all posts

Friday, 23 September 2011

Cosmetics

As the layout nears completion it is time for a quick tidy up of it's external appearance. Now the rules of the competition dictate that the box-file lid must close, but in any case I wanted the layout to still be a box-file externally when closed up. In other words, to look as much like a normal box-file as possible and be able to be stored as one. Since I am going to the trouble and compromise of building the layout in a box-file, it seems to me to defeat the point were it to loose those characteristics. However the outside of the box was starting to look a bit tatty and "butchered".

Amazingly I found a matt-black emulsion paint test-pot (Crown "rebel") at my local DIY store (presumably for the Goths, but why would you need a test-pot to see what black looks like?!). All the exposed chipboard of the box sides where it has been cut had already been sealed and smoothed with PVA glue. So the edges, and any other exposed card areas, or marked external surfaces, were touched-up with the black.

















Other than the two holes in one end for the tracks, the main modification to the box was to cut out a section of the front. I've kept this to re-fit, using some small hinges obtained from Squires. The hinges are super-glued to the box and then track-pins pushed into pre-drilled holes via the holes in the hinge plates. The lid catch still works, the hinged front now makes the closed box much stronger.
































I need somewhere to store the buildings, end-panels, extension track, and stock for this layout, so what better than a second box-file? I've been using one to store all the bits of the project, but to protect the contents I have used some cereal packet card to organise it. The backscene end panels slot inside the lid, the extension track along the back edge, and a set of "egg-box" partitions protect the wagons. The trouble is there isn't space for the tops of the buildings so I will need to re-organise, I'm sure they should fit in somehow!

Posted by Picasa

Thursday, 30 July 2009

Taking Stock!

Last month Colin Lea described his new stock boxes over on his blog, so I thought I'd describe my stock boxes I made a couple of years ago. Someone (I can't remember who) turned up to a Sussex Downs 009 group meeting with one of these:





It's a tough plastic crate containing four compartmentalised storage boxes (one of which has been removed in the photo to show how they slot in), which at the time were available in B&Q for about £20. Several of us rushed out to buy one as we saw the potential! Each of the storage boxes has four compartments with removable dividers, but with the dividers removed they are an ideal size for 009 stock.

A local upholstery shop supplied some 5mm thick foam sheet for about £5 - I also had some similar left over from a previous stock-box. This was cut into strips and sheets to line the bottom and sides of each compartment, and the lid, and glued in place with Bostik contact glue. Some removable strips can be added to reduce the depth of some compartments for narrower stock, and some "chunks" were cut from thicker foam to use as spacers between each item of stock, to protect couplings. In fact the springiness of the foam and lid tends to grip the stock gently, and stock is put in such that when the storage box is slid into the crate they are on their wheels. So the stock is well protected from damage.

It is surprising how much stock this can contain, and when in the crate it is very well protected. Unlike bespoke wooden stock boxes it is relatively light (though not with lots of white metal loco's in it! Even my rolling stock contains a fair amount of lead ....). So I have a robust and effective stock-box big enough for all my (serviceable) stock, for a reasonable price and a couple of evenings work cutting and gluing the foam.

I actually have a fifth storage box of near identical dimensions (it will even slot in the crate) which I bought from Hobbycraft previously and lined with foam in the same way (hence the left-over foam), and I'm sure other similar compartmentalised boxes are available.
Posted by Picasa