Showing posts with label storage. Show all posts
Showing posts with label storage. Show all posts

Wednesday, 17 June 2015

Boxing Day

Thakeham has literally been gathering dust recently, so I've finally got around to a job I'd been thinking about for a while - a storage box/cover. With no shows currently booked for future this might seem unnecessary, but it does allow me to safely store the layout (in the loft) free from dust or damage, as well as protecting it if it does go to another show.


It's made from hardboard as I had a sheet in the garage (no idea where it came from but it's not much use for anything else!), and fits the top and two open sides of the layout. The sloping front made it more complex than it needed to be but makes it easier to manoeuvre into small spaces like the loft or back of the car. It attaches to the layout with 4 bolts (two at the top of the backscene and one at the bottom of each side), these thread into captive "Tee nuts" embedded in small blocks of softwood, which have been glued behind the layout fascia.


With the bolts removed the cover just lifts away from the layout. The sides may bow a bit as they are unsupported, but it really doesn't matter. I found a gate handle in my bits box that makes a very handy carry handle - I've even managed to place it approximately over the centre of gravity!


Inside the cover the top (nearest) is stiffened by an off-cut of 9mm ply, while further ply and softwood pieces hold the joins together. The top sheet was bent down to meet the sloping sides and then boiling water poured over, which allows the hardboard to take on the curve shape. The layout name-board is just foam-core board, so is vulnerable but very light. It attaches to the layout with velcro so I put a strip inside the cover to hold it safely inside when stored.

The only down-side is that it has made the layout a lot heavier - the cover probably weights more than the whole layout! However it isn't exactly heavy and can be carried one handed, and just about manhandled into the loft.

Friday, 23 September 2011

Cosmetics

As the layout nears completion it is time for a quick tidy up of it's external appearance. Now the rules of the competition dictate that the box-file lid must close, but in any case I wanted the layout to still be a box-file externally when closed up. In other words, to look as much like a normal box-file as possible and be able to be stored as one. Since I am going to the trouble and compromise of building the layout in a box-file, it seems to me to defeat the point were it to loose those characteristics. However the outside of the box was starting to look a bit tatty and "butchered".

Amazingly I found a matt-black emulsion paint test-pot (Crown "rebel") at my local DIY store (presumably for the Goths, but why would you need a test-pot to see what black looks like?!). All the exposed chipboard of the box sides where it has been cut had already been sealed and smoothed with PVA glue. So the edges, and any other exposed card areas, or marked external surfaces, were touched-up with the black.

















Other than the two holes in one end for the tracks, the main modification to the box was to cut out a section of the front. I've kept this to re-fit, using some small hinges obtained from Squires. The hinges are super-glued to the box and then track-pins pushed into pre-drilled holes via the holes in the hinge plates. The lid catch still works, the hinged front now makes the closed box much stronger.
































I need somewhere to store the buildings, end-panels, extension track, and stock for this layout, so what better than a second box-file? I've been using one to store all the bits of the project, but to protect the contents I have used some cereal packet card to organise it. The backscene end panels slot inside the lid, the extension track along the back edge, and a set of "egg-box" partitions protect the wagons. The trouble is there isn't space for the tops of the buildings so I will need to re-organise, I'm sure they should fit in somehow!

Posted by Picasa

Sunday, 16 August 2009

Mouse Attack

Earlier this week we noticed a funny smell in the garage - that's right, mice. So out came the traps, and this afternoon with the help of my father-in-law we did a spring-clean, checking every box and sweeping out. I guess it wasn't a surprise to find the mice had been at Pen-Y-Bryn Quarry, which was stored in the garage.


The polystyrene forming the hills had been excavated (quarried?) and carried along the track all over the model, and small black droppings littered the hillside (in O gauge they might have passed for scale sheep droppings!). The little blighters had nibbled the rock-face (cork bark), and even tried some of the people and animals (tell-tale flashes of whitemetal!), plus other people, animals, and details were strewn about, flattened by the giant rodents. I did take a picture on my phone but it didn't come out, so the one above shows how it looked before the damage!

This evening I pulled off any loose details for safety and hoovered up the polystyrene and mouse droppings. I guess it could have been worse; the foamboard structure is intact, no wiring or track or buildings are damaged, it is just scenic damage. Some touching-up of paint, and sloshing some dilute PVA around with ballast and flock should not take too long, then putting the details back. But right now I'm not sure what to do, after all I still don't have anywhere better to store it; it is too large to go through the loft-hatch and since our second child arrived there is no space in the house. A 50cm cube is pretty large when you look at it.

It looks like I need to make a secure wooden box from MDF or hardboard, that will keep the dust, spiders, and especially mice out, so I can safely keep the layout in the garage. But then I think what's the point? If it is boxed up in the garage it cannot be seen or operated, it's not that likely to come out for exhibitions, so I might as well salvage what is worth keeping and get rid of it. After all I have 2 further layouts in the loft, another part-completed (and perhaps never will be?) layout in the garage (bare MDF and track wasn't as attractive to or easiliy damaged by the mice), as well as Awnagate in the dining room! Maybe it is the end of the line for this one ...