Thursday, 30 January 2014

A tour of Thakeham Tiles

I've not a lot to show this month, there has been some activity preparing Awngate and stock ahead of the NGSW show next month, but wheel cleaning and scenery hoovering don't make an exciting blog post. However I do have this photographic tour of Thakeham that I never got around to showing after it was finished. Click on the photos for a bigger view.


The foreman watches on as the skips are filled with sand under the hoppers. The track in this area is almost buried under spilt sand. The loco is a Hudson Hunslet built in the mid 1950's.


Looking down from the top of the path to the hoppers we see the train climbing the gradient to the tipping shed, the two colours of sand in the skips can be seen clearly. The loco is passing the engine shed on the left, while on the right pallet-loads of concrete blocks, kerb-stones, and paving slabs await dispatch.


That last picture has been posed to match the photo on the cover of Graham Lelliot's book about the line, which was the inspiration for this model. I think I've captured the essence of the site, though as you can see, I could do with a lot more pallets of concrete products!


As the train passes the engine shed we see that another loco waits in the doorway, perhaps it has been pushed out for maintenance under better light, or just to make more space for work in the shed? This is a pre-war O&K and is showing it's age with flaky rust breaking through the paint, while the newer Hudson is a little grubby but well kept. In the foreground the "portable" track sections can be discerned, with steel sleepers and even the fishplates visible. In places wooden sleepers can be seen under the steel ones, though the sand does seem to get everywhere!


On the footpath that crosses the site a Labrador listens to the rumble of the train over the steel bridge above, as it enters the tipping shed. Or has he seen a rabbit? His master waits nearby.


The bridge still stands today, though there are no trains, just a conveyor belt. (The striped beam in the foreground carries a pipe, and I omitted it from the model)


With the skips emptied into the appropriate chutes in the tipping shed the loco slowly pushes them back over the bridge, and past yet more concrete products.


In the yard a local team of builders have arrived to pick up some paving slabs, though they seem to be distracted arguing about whose turn it was to clean the van. In the background are rows and rows of concrete slabs, and piles of pallets waiting to be used. The footpath cuts though the site on the left.


The train rattles back down the grade to the sand hoppers, to repeat the process again and again. Behind the skips can be seen the steps up to the top of the hoppers, which are set into the old quarry, though now the sand arrives by road.


At the end of the day the skips have been left near the hoppers, while a spare skip wagon is in the siding by the shed. The skip body is upended in the bushes, presumably to prevent it filling with water. The O&K has been pushed back into the shed - mysteriously, it also seems to have turned around!

Thakeham Tiles will be at the SWING narrow gauge show in Bognor on the 17th May.

Friday, 3 January 2014

Happy New Year! Here's to a busy 2014...

Happy New Year to all readers! I notice many Bloggers are posting reviews of 2013. The modelling highlights of the year for me were completing Thakeham for EXPO in October, and the 009 Society Convention in September, plus seeing Landswood Park in print in the Industrial & Narrow Gauge Review. I also finished some interesting stock projects in 009 and O14, and got to some good exhibitions.

The end of the year was dominated by a house-move, things are now settling down but of course modelling time has been limited, and may be for a while yet, and much of my modelling tools and materials is still in boxes somewhere. However Awngate has been given a new home on top of an Ikea shelving unit in our new lounge/diner. One of those box-files also contains a layout!

 
Christmas has brought some interesting presents including a new controller (of which more later, but first I need to find a DIN plug), a Langley kit for a WW1 Hunslet loco, and a book about yet more obscure and interesting railways!

 
So with the projects I listed back in November yet to be tackled as well, I have plenty to get on with in 2014. It is looking like it will be a busy year, as I also have some exhibitions lined up:

  • Awngate will be at Narrow Gauge South West, Shepton Mallet, on the 15th February, so I need to make sure it still works!
  • Thakeham Tiles will be at SWING in Bognor, on the 17th May
  • Awngate will also be representing the Sussex Downs 009 Group at a show in Patcham, Brighton, on 14th June.

This in addition to the DIY jobs that are being lined up, and once I have got around to decorating my son's bedroom he'd like a bigger train set!
Posted by Picasa

Tuesday, 24 December 2013

Happy Christmas!

It is time to wish all readers and friends a Happy Christmas! Yes Santa is on his way, and if you don't believe me check out NORAD, apparently Rudolph's nose is hot enough to be tracked by their missile-tracking equipment!

It seems customary to post a wintry railway or model scene, but I don't have one. So instead here are the results of my kids' Playmobil advent calendars! My daughter's is at least trying to be in the spirit of Christmas, with Santa and an Angel feeding the forest animals. I don't recall which Gospel that was in, so not sure the relevance to advent...


... but my son's haunted pirate island scene is even further from Christmas!


Aah well, we've enjoyed their School and Sunday School nativity plays, so hopefully they understand Christmas is about more than Santa and Pirates.

Friday, 20 December 2013

Woodwork - but NOT Baseboards!

The last month has been rather manic, with the house move and sorting all our stuff into the new house (the garage is still full of boxes waiting to be emptied!), plus the kids have moved school, and we have had the preparations for Christmas. Work has been busy too. So no modelling to report.

However I have had a spot of woodwork to do. The house doesn't need work but we did decorate my daughter's bedroom. She had been in a toddler bed but we wanted her to have a proper bed, the trouble is the room is 6' 3" across - enough space for a mattress but not for a bed-frame, and to put a bed along the room would make it feel much smaller. Undaunted I bought a raised bed-frame (second-hand, it is less daunting to modify when cheap!) and set to with the saw...


I ended up removing about 2 inches from the length of the frame, this meant all the joints needed to be re-made at one end. Fortunately they were just a peg and bolt arrangement, but I did need to buy a 10mm drill bit for the pegs! I confess my hand-drilling was not square or accurate but with a bit of wiggling I got it all to fit together. 


Assembly was tricky as the bolts fit from the outside of the frame, but the proximity of the walls (and no space to bring the bed in assembled) meant that the order of assembly had to be carefully planned! The lengths were bolted together first then the end cross-pieces. The rails from the foot of the bed were removed to allow the mattress to overhang to the wall, and one was refitted lower down to retain rigidity. Finally a couple of metal corner brackets were added to keep it all square (in case my home-made joints were not rigid enough!)


The end result is a bed where we want it, that seems solid enough (and is free-standing from the walls), and one very happy little girl. (You may notice the room has also been decorated to her choice of colours). So it seems my experience making model railway baseboards has come in useful with a spot of home carpentry!

Saturday, 23 November 2013

Moving!

There will be a slight interruption to modelling proceedings...


...Hopefully normal service will be restored before too long!

Friday, 15 November 2013

Starting the Tram Loco

I decided the mounts that came with the chassis could be used, I selected those intended for the Billard as being the most suitable. Soldering them on was a little tricky, this would be easier before fitting the running gear to the chassis. The motor end bracket needed trimming to clear the rubber band drive.

 
The tram body etch is typical of Worsley Works, neat but basic and without instructions! I still find getting four sides square and aligned and soldered together a big challenge, but after an evening of fiddling I've got it as good as I am going to. Hopefully any remaining gaps can be filled and any misalignment put down to "character".

 
As yet I haven't fitted the roof, I need to find a suitable chimney first, and it might be better to leave fitting it until after sorting out the floor and interior. The etch includes multiple pieces to make up the distinctive U-shape buffer-beams of the Wantage Tramway prototype, however:
1) I can't make out how they are supposed to go together, and
2) being rather wide to suit the standard gauge prototype's buffers, I don't think they will suit a narrow gauge loco.
I think I will make up buffer-beams and side skirts from plasticard, the Wantage loco spent most of its life without side skirts but I will need them to hide the small wheels.

 
If you didn't know this was supposed to be a standard gauge loco you would never guess, it is tiny! At 27mm wide it is admittedly slightly wider than most 009 stock, but well within the variations of narrow gauge and as seen here, it looks at home with my Parkside "GVT style" coaches. I've bent the chassis mounts so the height looks about right, though I have yet to find a way to attach the chassis to the body.

 
So far a promising start, though it might be a while before it progresses much further, due to the impending house move!
Posted by Picasa

Sunday, 10 November 2013

Brighton Show 2013

Yesterday I popped over to the Brighton MRC show, a typical local club show in a rather cramped venue but not far to go and usually worth a visit. It was good to see a good Narrow Gauge presence. Here is Raven's Rock by Tony Hill in O-16.5, based on Dinorwic slate quarry scene it is impressive and detailed, really capturing the feel of the Welsh slate quarries.

 

 
Fairleigh Down in O9 by Jason & Mason Pendrey is a very different theme, inspired by MOD arms depots. It featured computer-controlled DCC trains, automated bunker doors, and a radio-control tank.

 

 
This 009 layout wasn't listed in the program, but I think it might have been by Phil Gardner, is a nicely done "Rabbit Warren". This type of layout has long been subjected to ridicule but I think it's great, popular with non-enthusiast show visitors and not too serious!

 
This layout also shows the new Peco RTR coach can take some seriously tight curves, I don't know how tight they are but that can't be more than 9" radius I reckon!

 
Not NG (except in the Great Western sense) but with some superb buildings was Woodstowe by David Cox in 00 scale.

 
There were a few other good layouts too, some I had seen before but most not, so an enjoyable show.
Posted by Picasa