Tonbridge with Loctern Quay

 Today I took Loctern Quay to the Tonbridge show. 

It performed well, other than the odd reluctant coupling (despite all the testing!), and received nice comments. The show was really busy in the morning, the afternoon more pleasant. It was a good show, a great selection of quality layouts and good trade support with useful suppliers. Good catering for exhibitors too! Some of my better photos snatched between operating sessions below. I didn't think to get a show guide, so I think I have the names of name all the layouts, but I may not and I don't have all the details! 

I'd been impressed with Express Daisy Sidings (EM) when I saw it in Railway Modeller, and it was good to see it in the flesh. I liked the shunting move counter, operated by a reed switch and a magnet in the loco, perhaps I should get one for Loctern Quay?

I'd seen Bulldog Quay, Oare Creek (EM) develop on RMWeb, so another layout I was pleased to see. The superb model ships rather steal the limelight, but the pre-grouping trains were delightful too. Talking of light, my one criticism is that spotlights on a pole at the back corner are a terrible way to light a layout...

The Victory (OO) is another simple but delightful model. The narrow peninsular design made it stand out and the high viewpoint drew attention to the detail, but it was another difficult model to photograph because of the lack of backscene. 

Tellindalloch in Autumn (OO) is another layout seen in Railway Modeller. The obvious feature is the Autumn forest setting, impressively modelled trees of a realistic and imposing height frame the scene nicely. The river is well modelled too, with twinkling lights to give the impression of flowing water. 

I think this is Dublingham Goods (OO). A nice model, but strangely using 3-rail track (hand-built) and ancient 3-rail locos. I don't know why. 

I think this is Surrey Arms (EM). Also with 3-rails, but that's because it is Southern electric. A fine model with subtle colouring. 

Moors View (N). Dartmoor in the winter. Very impressive scenery, and can't have been easy to do this well. 

The Yard (O, O16.5) - I've seen this before, but am always impressed and mesmerised by the operating lorries and crane. The actual trains are merely there as props to be loaded!

Wittenden (O-16.5/O9) - double narrow gauge!

Penmaenbach (OO)

The Rapido stand had decorated samples of their new Kerr Stuart loco. Very nice!

Loctern Quay - Prep for Tonbridge

Loctern Quay will be at the Tonbridge exhibition next Saturday, so this week I have been dusting, testing all the locos and checking all the couplings. There's always the odd coupling to tweak to get it working consistently, and a sticky place for locos was traced to a piece of stray ballast. Hoperfully, this means more reliable operation at the show. While I was at it, I had a bit of a play, and decided to get the new camera out and get some shots of operation.

A tram loco propels a train onto the quay. 

As the train loco uncouples and sets back across the crossing, the quay shunter moves forward. 

The little Bagnall draws a cut of wagons into the head shunt. 

Gradually, a new assortment of wagons collects on the back siding. 

The Bagnall shuffles wagons by the quayside warehouses. 

Finally, the train is ready to depart. 

All working well, so I just need to pack everything away now. 

Retro monorail fun

What better way to fill a dark evening in January than building a bit of Lego? One of my Christmas present was this retro tribute to 1980's space Lego. It even has a railway theme!

OK, stretching a point, but it's a kind of monorail with a 2-car "train". It's digitally controlled too - you can push it with your finger. Not too hard or it falls off it's track, but this set is meant more as retro-fun than toy I guess.  

It's "micro-figure" scale, with a tiny figure about 1/4 the size of a normal Lego person. The whole model is around 6" square. Does that count as a micro layout?

Micro spaceman can ride the monorail or sit in the control tower. I had quite a bit of 80's space Lego, back in the 80's, so this was rather fun. 

Fourdees Whiting Hunslet-style Tram Loco

After the push to get Whittingly ready for the deadline, then prepped for the NEC, it was time for an easy and quick project. This Fourdees kit seemed ideal. The 3D printed body kit "Whiting" is a tram loco inspired by Hunslet designs, and fits the Kato 109 chassis.

Very little prep was required. I cleaned up some printing marks and burnished some faint layering on the boiler. I also opened out the square coupling pockets for Microtrains couplings, this took a few minutes with a file - it's not often that fitting Microtrains is this easy.

The body, plus separate roof and backhead detail, and some crew, were primed. One of the crew is a poor quality whitemetal casting of unknown origin, but his face won't really be visible and his weight might help. The other is from my favourite recruitment agency - Dapol. The body was sprayed with a Halfords green enamel aerosol, which turned out to be problematic as the can seemed to be leaking propellant, clogged the nozzle, and when I realised I'd missed an angle it would only dribble. Fortunately, I could dribble some into a jar and touch-up the final bits with a brush!

The remaining painting was done with acrylics and a brush. The backhead detail is rather good, the half-height cab rear means there is a chance of seeing it though the crew mostly hide it. 

The resin body needs some weight, which helps the light chassis too - the Kato 109 runs smoothly enough but doesn't have much inertia. Roofing lead was cut and squashed to fit through the gaps into the side tanks, and a length was stuck under the boiler. 

Chassis fitted, and couplings installed with the screw through the coupling pocket. I had to use long-shank Microtrains to clear the nice cowcatchers. 

Crew stuck into the cab before fixing the roof (with PVA so it can be removed if needed). A little crushed coal was added over the moulded stuff in the bunkers. 

And complete. A very light weathering of water soluble oils has been applied, more may follow but I think it will stay reasonably clean. This view shows how good the print is, with no obvious layering, 3D printing has come a long way since the early days. The handrails and cab roof are a little clunky, perhaps the only clues of it being a 3D print?

I took a couple of photos with the new camera too.

And the final shot, a viewpoint on Loctern Quay that has been very difficult to capture due to the depth of field needed to get both loco and background buildings in focus. The new camera, set to F32, manual focus, and a long exposure on a tripod, can do it with no post-processing.

As expected, this kit has gone together quickly and easily, with most of the time painting it. It's a good looking and smooth running loco, which I hope will fit in well on Loctern Quay. The Fourdees kits are a great introduction to 009 loco kits, especially using the good value Kato chassis.